Cisco Router CISCO1941-SEC/K9, Cisco 1941 Security Bundle w/SEC license PAK
OFERTA NOVIEMBRE/2017: Usd. 2590.- A Pedido de 20 a 30 Dias
The platforms are architected to enable the next phase of branch-office evolution, providing rich media collaboration and virtualization to the branch while maximizing operational cost savings The Integrated Services Routers Generation 2 platforms are future-enabled with multicore CPUs, Gigabit Ethernet switching with enhanced POE, and energy monitoring and control capabilities while enhancing overall system performance. Overall, the Cisco 1900 series offer unparalleled total cost of ownership savings and network agility through the intelligent integration of market leading security, unified communications, wireless, and application services.This Cisco 1900 series integrated services router offers embedded hardware encryption acceleration, intrusion prevention, and application services. In addition, the platforms support the industries widest range of wired and wireless connectivity options such as T1/E1, xDSL, 3G, and GE.
Cisco 1941 Integrated Services Router
SecurityCisco IOS Firewall, IPS,IPsec (3DES and AES), SSL VPN
IP BaseEntry-Level Cisco IOS Softeare Functions
Universal Cisco IOS Image
2 integrated 10/100/1000 Ethernet ports
2 enhanced High-Speed WAN Interface Card slots that can host 2 single wide or 1 double wide and 1 single wide (e)HWIC
1 Internal Services Module slot
Fully integrated power distribution to modules supporting 802.3af Power over Ethernet (PoE) and Cisco Enhanced PoE
Secure collaborative communications with Group Encrypted Transport VPN, Dynamic Multipoint VPN, or Enhanced Easy VPN
Integrated threat control using Cisco IOS Firewall, Cisco IOS Zone-Based Firewall, Cisco IOS IPS, and Cisco IOS Content Filtering
LED area description
· SYS: Solid green ---normal operation.
Blinking green ---System is booting or is in ROM monitor mode.
Amber ---System error.
Off ---Power is off or system board is faulty.
· ACT: Solid or blinking ---any packets are transmitted/received on any WAN/LAN, or when monitoring system activity.
· PoE: Green ---PoE is available.
Amber ---Power supply is not supplying PoE power.
· ISM/WLAN: Green ---Initialized.
Amber ---Initialized with error.
· CF 0&1: Green ---Flash memory is busy. (Note: Do not remove the CompactFlash memory card when this light is on.)
Amber ---Initialized with error.
Blinking Green then turns off ---CompactFlash is ready for removal.
(Note:Remove the CompactFlash when the light turns off.)
· S (Speed): 1 blink + pause ---GE port operating at 10 Mb/s.
2 blink + pause ---GE port operating at 100 Mb/s.
3 blink + pause ---GE port operating at 1000 Mb/s.
· L (Link): Green ---GE link is established.
Off ---No GE link is established.
· 2 integrated EHWIC slots for flexible configurations & support of two modules:
1 double wide HWIC-D or single wide EHWIC/HWIC module;
A 2nd single wide E-HIC/HWIC module.
(Each HWIC Slot offers high data throughput capability with up to 1.6 Gbps aggregate towards the router processor and up to 2 Gbps
aggregate to other module slots over MultiGigabit Fabric (MGF)).
· 1 AUX port (auxiliary port) ---RJ-45 connectors for Remote configuration.
· GE 0/0 & 0/1---Two Gigabit Ethernet ports (RJ-45 connectors).
· 2 high-speed USB 2.0 ports enable another mechanism secure token capabilities and storage.
· 2 external Compact Flash slots supporting high-speed storage densities upgradeable to 4GB in density.
Q: Can I console 1900 router with USB port?
A: YES, USB console In addition to the RJ-45 Console port, the Cisco 1900 ISRs have a USB 5-pin mini Type-B port. When first connecting to this port, a USB driver must be installed. You will be prompted to install the driver. Simply follow the installation prompts to install the driver.
Q: I want 3 x Cisco 1941 with advanced IOS and 3 x EHWIC 4 Ports WAN, which card is OK?
A: HWIC-4T or EHWIC-4ESG is OK. EHWIC-4ESG is more powerful in your network.
Q: Is load balancing a feature of SEC Router?
A: NO, almost all Routers have this feature.
Q: How to config factory default?
A: Router>en Router#erase start Erasing the nvramfilesystem will remove all configuration files! Continue? [confirm] [OK] Erase of nvram: complete %SYS-7-NV_BLOCK_INIT: Initialized the geometry of nvram Router#reload Proceed with reload? [confirm] %SYS-5-RELOAD: Reload requested by console. Reload Reason: Reload Command.
Q: “Router show warning message: Unsupported compact flash detected. Use of this card during normal operation can impact and severely degrade performance of the system.“What does it mean?
A: Means the router and the flash is not adapt. It would reduce the system’s performance.
Q: The router won't boot at all, the SYS led is off, according to the cisco documentation the system board is faulty.
A: With the power switch on and the SYS LED off, does the fan operate? –If yes, the router is receiving power. The fan is connected directly to the DC outputs of the power supply. –If no, check the power source and power cable.
Q. If I purchased a Cisco ISR G2 router on Cisco IOS Software Release 15.0(1) M before the limitation was imposed, what should I do? And should I need to upgrade my Cisco IOS Software?
A: Assuming that you already have purchased the securityk9 package for encryption, you must purchase a HSEC-K9 license as a spare.
Q.Why do I need to purchase the SEC-K9 license as a spare?
A. If you purchase a Cisco ISR G2 chassis and later decide to turn on security features, you must buy a SEC-K9 license. The administrator must download the license to the router and follow the license installation instructions that come with the license to be able to use the security features on the router. The more SEC-K9 licenses for Cisco 1900 routers, you can visit: Cisco 1900 Routers
Q. On the Cisco ISR G2 routers with the SEC-K9 license, what tunnel count and performance throughput are available?
A. The SEC-K9 permanent licenses apply to the Cisco 1900, 2900, and 3900 ISR G2 platforms; these licenses limit all encrypted tunnel counts to 225 tunnels maximum for IP Security (IPsec), Secure Sockets Layer VPN (SSL VPN), a secure time-division multiplexing (TDM) gateway, and secure Cisco Unified Border Element (CUBE) and 1000 tunnels for Transport Layer Security (TLS) sessions. The SEC-K9 license limits encrypted throughput to less than or equal to 85-Mbps unidirectional traffic in or out of the ISR G2 router, with a bidirectional total of 170 Mbps. This requirement applies for the Cisco 1900, 2900, and 3900 ISR G2 platforms. The more detailed Cisco 1900 Licenses you can click here, e.g. L-SL-19-SEC-K9=, SL-19-SEC-K9,L-SL-19-DATA-K9=, SL-19-DATA-K9
2 x 10Base-T/100Base-TX/1000Base-T - RJ-45
Management : 1 x console - RJ-45
Management : 1 x console - mini-USB Type B
Serial : 1 x auxiliary - RJ-45
USB : 2 x 4 PIN USB Type A
Expansion Slots Total (Free)
2 ( 2 ) x EHWIC
2 ( 1 ) x CompactFlash Card
1 ( 1 ) x ISM
Power supply - internal
AC 120/230 V ( 50/60 Hz )
Dimensions / Weight / Miscellaneous
CISPR 22 Class A, CISPR 24, EN55024, EN55022 Class A, EN50082-1, CAN/CSA-E60065-00, ICES-003 Class A, CS-03, AS/NZS 3548, FCC CFR47 Part 15, EN300-386, UL 60950-1, IEC 60950-1, EN 60950-1, CSA C22.2 No. 60065, BSMI CNS 13438
Cisco IOS Security
100% Quality Assurance:
All items are ORIGINAL and GENUINE only.
Free CCIE Technical Support
Our FREE Cisco CCIE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.
Standard Hardware Warranty Policy :
Original new sealed Cisco product: 1 Year
The Support Contacts :
If your Cisco products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.
The RMA Confirmation :
Your sales representative will send you RMA form.
(see attachment. PO No.; Product Serial No.; Description of Failure or Problem)
You Fill it and send back to sales representative.
RMA Return Shipment : A : After ot RMA form, sales representative will tell you returned instruction by email, including shipping address and special shipping invoice. B : Returned products have to be packed properly to avoid damage during delivery. C : All accessories and user documentations should be returned. D : Once shipped, pls tell sales representative tracking No. immediately.
Delivery Charges :
The Customer is responsible for paying shipment charges when returning to us; We will pay for shipment of the repaired items back to the customer
RMA Turnaround Time :
The defective products will be sent to Cisco Distributor for repair.
Within four weeks after receipt of returned item, the repaired or replacement item will be ready for return shipment.
Then item will be shipped to customer by Express such as DHL or Fedex.